MODEL 190CAP

Contact for purchase
A green roller conveyor with metallic rollers and a yellow motor attached.

MEDIUM DUTY MINIMUM PRESSURE ACCUMULATOR

Applications / Features:

  • Accumulates Tote Pans, Cartons, Boxes, etc.

  • Minimum Back Pressure

  • Driving Belt – 8″ wide for 15″ and 21″ between frames, 12″ wide for 27″ between frames, 16″ wide for 33″ and 39″ between frames; black PVC 120 belt.

    Bed – Roller bed width between frames, 15″, 21″, 27″, 33″, and 39″. 7″ x 1-1/2″ x 12 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports.

    Tread Rollers – 1.9″ diameter x 16 gauge galvanized steel rollers spaced on 2-1/4″, 3″, 4-1/2″, or 6″ centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers.

    Pressure Rollers – 1.9″ diameter x 16 gauge galvanized steel rollers spaced on 6″, 9″, or 12″ centers, cam adjusted.

    X-Bracing – Frame Squaring device supplied on conveyors 40 feet and longer on every other bed section. X-bracing insures good product and belt tracking.

    Tail Pulley – 4″ diameter crowned with 1-3/16″ shaft.

    Drive Pulley – 8″ diameter crowned and fully lagged with 1-7/16″ diameter shaft.

    Snub Roller – 2-1/2″ diameter adjustable, located directly behind drive pulley. 2″ diameter at each end directly behind terminal pulleys.

    Return Idlers – 1.9″ diameter adjustable on 10’0″ centers.

    Floor Supports – 31-1/2″ to 45-1/2″ adjustable from the floor to top of rollers. One support is supplied at each end of the conveyor and at each bed joint.

    Take-Up – Located in center drive, provides 24″ of belt take-up.

    Bearings – Sealed and pre-lubricated with cast iron housings.

    Speed Reducer – C-Face mounted heavy duty worm gear reducer.

    Motor – 1/2 HP 230/460-3-60 TE motor.

    Belt Speed – 60 FPM constant.

    Capacity – 150 pounds per foot.

  • Guard Rails – Adjustable channel, continuous channel, or solid steel guard rails available.

    Floor Supports – Lower or higher supports are available. Minimum elevation 20″.

    Ceiling Hangers – 1 ⁄2″ diameter threaded rods 8 feet long with locking nuts and mounting hardware. Other lengths are available.

    Side Mounted Drive – The end drive is mounted to the side of the conveyor bed section. Specify side. Minimum 9″ elevation with 4″ drive pulley, minimum 12″ elevation with 8″ drive pulley.

    Motor – Single phase, energy-efficient, explosion-proof, etc. Other HP is available.

    Belt Speed – Constant and variable belt speeds are available.

    Electrical Controls – Magnetic starters and push-button stations; manual motor starters with overload protection, others.