MODELS “251SR / 251SRC”

Frames – 4″ x 4 gauge steel channel with bolted cross members, powder painted. Rollers set 1⁄4″ high.

Rollers – 2-1⁄2″ x 11 gauge steel tubing with swaged bearings.

Bearings – Labyrinth sealed and grease packed.

Axles – 11⁄16″ hex shaft, spring-loaded.

Couplings – Splice plates, for bolting sections together.

Widths – 13″ between frames (B/F) and wider in two inch increments up to 27″ between frames; also 31″, 33″, 37″, 39″, 45″, 51″, 55″ and 59″ between frames.

Lengths – 10′ and 5′ straight sections.

Curve Degree – 45° and 90° with 2′ 8-1⁄2″ inside radius for widths up to 27″ between frames. 4’0″ inside radius for 31″, 33″, 37″, and 39″ between frames. Tapered roller curve available.

Capacity – 650 pounds per roller with 3,750 pounds maximum distributed live load over 10 feet for 12″ nominal roll to 3,500 pounds on widest sizes; 8,000 pounds maximum distributed live load over 5′ lengths. Curve sections same as 10′. All capacities based on 3″ centers.