MODELS “254SR / 254SRC”

Frames – 3-1⁄2″ deep x 1-1⁄2″ x 10 gauge powder painted formed steel with bolted cross members. Rollers set 1⁄4″ high.

Rollers – 2-1⁄2″ diameter x 14 gauge steel tubing with swaged ends to provide firm bearing seat. 2-1⁄2″ to 1-11⁄16″ tapered rollers available for curves.

Bearings – Labyrinth sealed and lightly oiled.

Axles – 7⁄16″ hex shaft, spring-loaded.

Couplings – Butt type, for bolting sections together.

Widths – From 13″ between frames (B/F) and wider in two inch increments up to 27″ between frames. Also 31″, 33″, 37″, 39″, 45″, 51″ and 55″ between frames.

Lengths – 10′ and 5′ straight sections.

Curve Degree – 45° and 90° with 2’8-1⁄2″ inside radius for widths up to 27″ between frames. 4’0″ inside radius for 31″, 33″, 37″, and 39″ between frames.

Capacity – 350 pounds per roller on narrow sizes, with 1,350 pounds maximum live load on 10′ sections; 3,300 pounds maximum live load on 5′ section.