MODELS 267SR / 267SRC

Frames – 4″ deep x 4 gauge channel with bolted cross members, powder painted. Rollers set 1⁄4″ high.

Rollers – 2-5⁄8″ diameter x 7 gauge steel tubing with swaged ends to provide firm bearing seat.

Bearings – Labyrinth sealed and greased packed.

Axles – 11⁄16″ hex shaft, spring-loaded.

Couplings – Splice plates, for bolting sections together.

Widths – From 13″ between frames (B/F) and wider in two inch increments up to 27″ between frames. Also 31″, 33″, 37″, 39″, 45″, 51″, 55″ and 59″ between rails.

Lengths – 10′ and 5′ straight sections.

Curve Degree – 45° and 90° with 2′ 8-1⁄2″ inside radius for widths up to 27″ between frames. 4’0″ inside radius for 31″, 33″, 37″, and 39″ between frames. Tapered roller curves available.

Capacity – 650 pounds per roller on narrow sizes, with 3,750 pounds maximum live load on 10′ sections; 8,000 pounds maximum distributed live load over 5′ lengths. Curve sections same as 10′. All capacities based on 3″ centers.